11 oz Yellow Sublimation Two Tone Mug
The Yellow Sublimation Two Tone Mug combines a bright white, high-gloss printable exterior with a bold yellow interior and matching C-handle. Coated with a premium, smooth polymer layer, it delivers vibrant, full-color sublimation transfers that resist fading, peeling, or scratching over time. Ideal for custom gifts, corporate branding, and personalized merchandise.
Key Specifications & Features
Durability: A Grade, Handwash Only (Microwave Safe)
Capacity: 11 oz (~325 ml)
Design: Glossy white exterior with contrasting color inner wall and handle
Material: Grade-A Ceramic with premium sublimation coating
Printable Area: Approx. 200 mm (width) x 95 mm (height)
Compatibility: Standard 11 oz mug presses, 3D vacuum heat presses, and convection mug ovens
What heat press settings are recommended for 11oz two tone sublimation mugs?
A recommended starting setting for an 11oz two-tone ceramic sublimation mug is:
Temperature: 190°C
Pressing time: 240 seconds
Pressure: Medium to firm
Heating element: 11oz mug press element
Adjust the pressure before heating the press. The heating element should grip the mug firmly and evenly without applying excessive force.
Because mug coatings and heat presses differ, always test one mug before pressing a full order.
If the print is pale or uneven, first check that the mug is receiving even pressure. You can then increase the pressing time in small increments of approximately 10 to 20 seconds.
If the print appears blurred, brown or over-pressed, reduce the pressing time or temperature.
Always follow the pressing instructions supplied with the exact mug blank when they differ from these starting settings.
Which part of an 11oz two tone mug can be sublimated?
Sublimation designs are applied to the white polymer-coated exterior of the mug.
The coloured handle and coloured interior are decorative areas and are not normally intended for sublimation printing.
The white exterior provides the coated surface needed for dye-sublimation ink to bond with the mug during the heating process.
Do I need to mirror my design before sublimating a mug?
Yes. The design must be mirrored before it is printed onto sublimation transfer paper.
Mirroring ensures that text, names, logos and other directional elements appear the correct way around after the artwork is transferred to the mug.
Most sublimation printing software and design programs include a mirror or horizontal-flip setting.
How can faded sublimation prints on mugs be prevented?
Faded mug prints are commonly caused by insufficient heat, pressing time or pressure.
To prevent faded results:
– Use genuine dye-sublimation ink.
– Use sublimation transfer paper.
– Confirm that the mug has a sublimation-ready coating.
– Apply even medium-to-firm pressure.
– Make sure the heating element contacts the mug evenly.
– Secure the transfer tightly against the mug.
– Use the recommended time and temperature.
– Test one mug before completing a large order.
If only one section is faded, uneven pressure or a worn heating element may be the cause.
Customisable Suppliers is based in Cape Town and supplies ready-to-press DTF and UVDTF transfers nationwide across South Africa, including Johannesburg, Durban, Pretoria, Gqeberha, Bloemfontein and surrounding areas.
